MS 3500™ Walk-Through Metal Detector
by Garrett
• Microprocessor-driven for greater sensitivity in weapons detection.
• User-friendly programming for precise control of detection settings.
• Computerized access codes ensure tamper-proof settings.
• Built for maximum security applications with minimum maintenance.
• Uniform detection coverage from head to toe.
• Three ankle-boost sensitivity levels.
• Built with 3/32 inch armor aluminum sheets, abuse resistant.
• Assembled with tamper-proof screws.
• Weatherproof for outdoor use.
• User-friendly programming for precise control of detection settings.
• Computerized access codes ensure tamper-proof settings.
• Built for maximum security applications with minimum maintenance.
• Uniform detection coverage from head to toe.
• Three ankle-boost sensitivity levels.
• Built with 3/32 inch armor aluminum sheets, abuse resistant.
• Assembled with tamper-proof screws.
• Weatherproof for outdoor use.
Included
The MS 3500's Access Control Panel Eight (8) touchpad controls perform all control duties on the MS 3500 and clearly report operation information with alphanumeric displays. Touchpad include: STANDBY. OPERATE, NUMERIC 2, VOLUME, + / -, PROGRAM and ACCESS.
The Movable Display Keypad can be arranged inside the locked and weatherproof Overhead Control Unit or attached to the exterior of the unit. When the STANDBY touchpad is engaged, the unit goes into a low Power Mode, and can be returned to full operation by engaging the OPERATE touchpad. Pressing the OPERATE touchpad initiates a comprehensive, automatic self-test and diagnostic program for instant fault detection. Faults are revealed on the LCD Display.
The Movable Display Keypad can be arranged inside the locked and weatherproof Overhead Control Unit or attached to the exterior of the unit. When the STANDBY touchpad is engaged, the unit goes into a low Power Mode, and can be returned to full operation by engaging the OPERATE touchpad. Pressing the OPERATE touchpad initiates a comprehensive, automatic self-test and diagnostic program for instant fault detection. Faults are revealed on the LCD Display.
• Weatherproofing / Foreign Object Protection Standards: Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 60529.
• Tamper-Proof: All detection electronics can be secured behind a key-lock door in the Overhead Cap Assembly. Dual-level access codes require to or changes all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non re-settable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt at access. All connectors are keyed to ensure proper connections.
• Construction: Rugged, heavy-duty 3/32 inch armor aluminum plates with resilient corner caps for protection against maximum physical abuse.
• Synchronization: Multiple channels permit several MS 3500s and other Garrett detectors to operate simultaneously in close proximity.
• Alarms: Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected.
• Interference Suppression: 100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry.
• Masking: Programs designed to eliminate the problem of dissimilar targets canceling each other.
• Tamper-Proof: All detection electronics can be secured behind a key-lock door in the Overhead Cap Assembly. Dual-level access codes require to or changes all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non re-settable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt at access. All connectors are keyed to ensure proper connections.
• Construction: Rugged, heavy-duty 3/32 inch armor aluminum plates with resilient corner caps for protection against maximum physical abuse.
• Synchronization: Multiple channels permit several MS 3500s and other Garrett detectors to operate simultaneously in close proximity.
• Alarms: Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected.
• Interference Suppression: 100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry.
• Masking: Programs designed to eliminate the problem of dissimilar targets canceling each other.
Product Dimensions
Interior Overall 30 in. W x 80 in. H x 20" D
Exterior 50 in. W x 89 in. H x 20 in. D
Exterior 50 in. W x 89 in. H x 20 in. D
Electrical Specs
• Power: Fully automatic 100 to 240 VAC.
• Power supply: Meets UL, CSA, TUV and VDE standards.
• Control Outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
• Power supply: Meets UL, CSA, TUV and VDE standards.
• Control Outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
Max Temperature
• Operating Temperatures: -4° F (-20° C) to + 158° F (70° C)
• Humidity: To 95% non-condensing
• Humidity: To 95% non-condensing
Warranty
2 year limited parts and labor manufacturer warranty.
Product Sku
786156001305
There are no reviews for this product, yet.
back to top
| About Us | | | Contact Us | | | Shipping Policy | | | Return Policy | | | Sitemap |
sitemap +